samurai Bathtub and Shower Stalls Clean Up

samurai

Most bathtubs are made of porcelain. If the fixtures are older, chances are the material is porcelain on cast iron. These fixtures may not be as acid- and alkaline-resistant as newer porcelain-on-steel tubs.

Fiberglass and acrylic tubs, which are lighter and easier to install than steel tubs, are used in new construction and remodeling, but they are not as durable as porcelain-coated steel. If you have a fiberglass tub, you will have to be especially careful when you clean it to avoid scratching the surface. Here are some guidelines for cleaning your bathtub:

• Porcelain tubs should be cleaned with nonabrasive powder or liquid cleanser. Sprinkle powder on a damp sponge and apply it to the porcelain surface of the tub or basin. Use a synthetic scouring pad on stubborn soil. Rinse well.
• When you clean the bathtub, also remove hair from the traps in the drains to prevent clogging.
• Fiberglass tubs should be cleaned with a commercial fiberglass-cleaning product or nonabrasive liquid cleanser. Apply either product with a damp sponge, and rinse with clear water.
• Commercial rust removers are very effective in removing rust stains. Wear rubber gloves when you work with these products because they contain acid. You can also clean discolored porcelain fixtures with a paste made of cream of tartar moistened with hydrogen peroxide or a paste made of borax moistened with lemon juice. Scrub the paste into lightly stained areas with a brush, and rinse well.
• A ring around the tub can be rubbed away without cleaners using a nylon net ball or pad.
• Cover a stubborn bathtub ring with a paste of cream of tartar and hydrogen peroxide. When the paste dries, wipe it off.
• To remove discoloration from a yellowed bathtub, rub the tub with a solution of salt and turpentine. Rinse well. Caution: Wear rubber gloves when you work with this solution.

Thereafter, adding a little of the degreasing detergent to the bath water when you are done and agitating the water as it drains, helps keep the "ring around the tub" from forming. Be sure to rinse your tub with clean water to remove soap and avoid streaking.

Shower Stalls

Shower stalls are easy to maintain, once you have thoroughly cleaned. All you need to do is wipe down the wet surfaces after a shower. Use a squeegee on flat surfaces and a towel on the rest.

If water is wiped from the surface, there will be no water stains, no soap scum, and no oily grime buildup. You should, however, give your shower a good cleaning and treat with a sanitizer (to avoid mildew in hidden places) at least once a month to six weeks.

For more cleaning topic, check out links below:

carpet cleaning west auckland, carpet cleaner

---

---

---